
CATÀLEG DE PERFILS TECNOLÒGICS [Altres]
Benvinguts al servei de novetats tecnològiques.
Aquest servei identifica les noves ofertes i demandes tecnològiques publicades setmanalment del sector energètic renovable de 44 països membres de la xarxa d'EENs. Per iniciar el contacte/ampliar la informació d'alguna oferta o demanda del vostre interès, ens ho podeu sol·licitar en línia un cop contestades les preguntes al peu del perfil seleccionat.
Contacte: Maria Lumbierres - Tel.: 93 567 48 92
10
GB 43O3 3HHE
Innovative platform for tidal stream energy exploitation
A UK renewable energy company is in the latter stages of developing an innovative platform for tidal stream energy exploitation. The novel platform approach offers increased power per installation and increased operational efficiency of horizontal axis turbines already in production. It also offers significantly decreased capital expenditure and operational expenditure compared to other systems. The developer seeks technical and commercial collaboration.
10
ES 27F4 3HDC
Innovative Energy Accumulator based on Gravitational Energy Use
An Andalusian engineer (Spain) has patented an efficient energy storage system that uses the Earth's gravitational field to store energy until it is required to be used. This system can be combined with other clean energies (solar, wind, water, etc.) that will be converted into gravitational energy. He is looking for license agreement and technical cooperation agreement.
10
GB 45P2 3HC0
Technology for converting mixed plastic waste to fuel
A UK North West region University has developed a novel process that will convert mixed plastic waste into its constituent chemical components and converting these into usable fuels. The developer is looking for a partner collaboration to carry this work on to a pilot plant and then full production.
10
IT 56Z4 3H7X
Solar focusing device for photovoltaic, thermic or hybrid cells
An Italian company working in the energy field has developed a solar focusing device able to increase the performance of photovoltaic, thermic or hybrid cells by a factor between 2 and 6. The system can be easily integrated into the existing architectural landscape, especially in roofs and walls. The company is looking for other firms interested in licensing agreements for the production and commercialization of this apparatus.
10
IT 56Z4 3H7Y
High efficiency engine with "Stirling-similar" cycle
An Italian company working in the energy field has developed a high efficiency engine.Thanks to the development of the "classical" Stirling cycle, this innovative technology is able to use also small temperature gaps - process heat,solar and geothermal energy- to produce electric energy.It allows to create a Stirling-similar thermodynamic cycle, using common components and materials.The company is looking for other firms interested in licensing agreements for the production and commercialisation
10
HU 50S5 3H21
New process to use sweet sugar sorghum to stabilise and increase biogas
production
A Hungarian SME developed a technology which stabilises the biogas production process by utilising the green stalk of the Monori sweet sorghum plant in relation with biomass,organic materials, and liquid manure. The advantage is that no chemicals are used during the process. The technology can be used in the fields of alternative energy and biogas production. The Hungarian enterprise is interested in commercial agreement and technical consultancy.
10
ES 28G2 3H0P
High efficiency water-lithium bromide absorption machine
A Spanish public research organisation has developed two air-cooled water-lithium bromide absorption prototypes that do not exist on the market yet: a double-effect machine and a single-double effect one in an only unit.They are as efficient as electrical machines. They can be driven by fuel, renewable energies (solar, biomass, etc) or by residual heat (tri-generation systems). They are suitable for static or mobile uses. Companies for developing and licensing the technology are sought.
10
BE 0427 3GSG
Air bearings for extremely high speeds - over 1 million rpm, no wear
A Flemish research organization has developed air bearings for extremely high speeds. The diameter x speed (DN) number attained is probably the highest on record for this technology, thanks to an innovative stabilizing system. Possible applications include micro turbines, small compressors, turbo chargers and high-speed milling spindles. The researchers offer technical co-operation for the development of applications, as well as engineering and technical consultancy on this technology.
10
LV 58AD 3H0I
Axial magnetic flux generator with permanent magnets
A Latvian company has developed and patented a multipolar electric generator with a potential application in multiple industries. The generator has reduced motion moment required for tapping, lowered energy losses caused by warming and increased efficiency factor. The company seeks for cooperation with research institutes, technical centres and companies for integration the generator in wind, hydro, auto-moto etc. power systems.
10
DE 0855 3H3H
Technologies for the reduction of fine particulate emissions from wood
combustion
A German research institute is working on two projects in order to reduce fine particulate emissions from wood combustion. One encompasses the two-step filtration/cleaning of the flue gas from small combustion plant with a heating capacity of 30 to 500 kW. Another approach is the utilization of adsorption and absorption technologies for the removal of tars and for the recovering of energy from the flue gas stream. Partners are sought for developing the technologies into market-ready products.
10
ES 28F9 3GSC
Ecological additive for fossil fuels reducing consumption and pollution
A Spanish company has developed an ecological additive for all kind of fossil fuels; it hydro-oxygenates the fuel and thus reduces the fuel consumption, improving the burners, ovens, boilers and engines performance. It decreases the cost for maintenance of installations and prolonging the operating life of injectors and valves. This additive is based on a vegetal basis, and significantly reducing the pollution. They look for license or commercial agreements with technical assistance.
10
SE 67CJ 3GUJ
Chemical heat pump for long-term storage of renewable energy.
A Swedish SME has developed a chemical heat pump to store thermal surplus energy from renewable sources in salt. The technology is based on steering this simple, low cost and clean process. The energy can be stored for several days and will then be used to heat houses and water. The system is flexible due to separated reactor and salt storage packages. Partners are sought for further development of the product and designing of a prototype (joint venture) as well as financial resources.
10
ES 27F3 3GTA
Electric power production based on severity
An Andalusian company (Spain) has developed an electric generation system based on fluid movement even alternator connected to the achievement of electric power. The company is looking for cooperation in financial issues or a joint venture agreement for manufacturing the product.
10
ES 27F3 3GTE
Electricity and hydrogen production
An Andalusian company (Spain) has developed a system for obtaining hydrogen and electricity without external supply of energy. The company seeks partners interested in working with companies for further market evaluation and commercialisation of the technology.
10
DE 1380 3GKW
Green Energy Car
A German-Greek SME has developed a car completely powered by green energy. The car is supplied by energy from sun, air flow, wind, the magnetic field and movement of axis directly during driving. As the batteries are constantly being recharged it is not necessary to stop the green car for recharging. The company is looking for partners from the automotive industry interested in licence agreements or a joint venture.
10
IT 55W4 3GE2
An advanced tool designed for dynamic process modelling and simulation
of conventional and renewable sources power plants and industrial integrated
systems
An Italian software and process engineering company has developed a complete tool for modelling and simulation of integrated power plants permitting to build dynamic simulation models mainly addressed to the power production area with special attention to the renweable energy sources. The company is looking for partners interested in co-operating in the development of the dynamic simulation modules and components by scientific and technical point of view in different technology areas.
10
GR 49Q4 3G9D
Hydrogen Fuel Cell Power Generator
A Greek based manufacturing company located in Athens, having on its portfolio more than 100 products associated with A/C units for vehicles and fuel cell technologies, has developed an innovative technology for the design of hydrogen fuel cell power system. The company is interested in joint venture and technical cooperation agreement.
10
AT 0102 3GC7
PS: FP7 ENERGY.2010.3.4-1 ? Biogas plant interested in using its CO2 emissions
for operating an algae plant to produce biodiesel
An international consortium co-ordinated by an Austrian company is preparing a FP7 project proposal (FP7 ENERGY.2010.3.4-1 ? deadline 4.3.2010). They are looking for a biogas plant in the South of Spain or Portugal to be partner in the project. The project shall demonstrate the transformation of CO2 emissions from a biogas plant into biodiesel via an innovative process in an algae plant. There should be a vacant area near the biogas plant available to build the algae plant.
09
GR 49Q4 3FUS
Solar Energy Utilization for the drying of clay products
A Greek clay products manufacturer is looking for innovative solar utilization technologies for the drying of clay products. The partnership sought is commercial agreement with technical assistance.
09
ES 26E9 3FJN
Fuel cell and battery high added value components validation
A Basque research center helped by an industrial partner is developing polymer electrolyte membrane fuel cells (PEMFC) and Li-ion batteries technology mainly for portable applications. Partners are sought for technical cooperation as manufacturers of novel materials and components for these technologies.
09
IL 80ER 3EUX
Retrofitted 3D solar façade component system that performs as a protective
shading element and as a solar energy producer
Retrofitted 3D solar façade component system that performs as a protective shading element and as a solar energy producer through the incorporation of PV cells. Responsive to different local ecliptic in different countries and climate zones, production technology will include mechanisms for non-standard components production in a cost-effective process. Industrial and financial partners for further development and for the production of the first prototype are sought.
09
ES 25E2 3E23
High heat flux heat sink with adaptable profile of temperature
A Research Group of a Catalan University has developed a compact heat sink that can provide temperature profiles of the cooled object adapted to the needs of the application. It is particularly adapted to cool the applications where high heat flux have to be extracted, with the main advantage of its ability to control the distribution, through the variation of its internal geometry, of the capacity of extraction of the heat flux. They are looking for a technical cooperation or license agreement.